isometric isometric title scale date dr dwg rev the information contained in this document is proprietary to e-switch and is not to be copied or transferred sheet of rev pcr no description date by 200mdp3t1b1m1qeh 2:1 7/27/2007 ST222005 a bf 1 1 without locking ring with standerd locking ring panel mounting 9.40 [.370 in] 8.13 [.320 in] 9.14 [.360 in] 25 ~ pos. 1 pos. 3 pos. 1 pos. 2 pos. 3 switch function off on on 2-3, 5-6 open 2-1, 5-4 a 17510 released for production 7/27/07 bf note: 1. all dimensions in mm [inch] 2. general tolerance: x.x=0.4 x.xx=0.25 3. terminal numbers for ref only 4. plating material: silver 5. rating: 3amps @120vac or 28vdc, 1amp @250vac 6. electric life: 30,000 make-and-break cycles at full load. 7. insulation resistance: 1,000 mega-ohm min. 8. dielectric strength: 1,000 v rms @sea level. 9. operating temp.: -30c to 85c 10. denotes critical parameter. 11. 2002/95/ec (rohs) compliant 12. hardware to be supplied in bulk t200000-lock washer qty. 1 t200002-lock ring qty. 1 t200001-hex nut qty. 2 e-logo on opposite side n 2.54 [.100 in] 5.59 [.220 in] .51 [.020 in] 8.64 [.340 in] n 6.00 [.236 in] 4.40 [.173 in] flat circuit: dpdt 1 2 5 34 6 10-48 uns-2a2a threads 4.55 [.179 in] n 4.95 [.195 in] n 2.38 [.094 in] 6.10 [.240 in] n 4.95 [.195in] 4.06 [.160 in] 1.52 [.060 in] .76 [.030 in] 4.06 [.160 in] 2.54 [.100 in] .51 [.020 in] 2.80 [.110 in] epoxy seal
|
